iDeneb v1.4 10.5.6 for Intel/AMDDeveloped by Layne, Cri900 and iHackintosh Team. Artwork by The captain. Thanks to Tester, Piper2.
Thanks to all the OSx86 developers.
For More info you can visit the official site:http://www.ideneb.net
Warnings!警告!
* Do Not Install the iDeneb Base System over an existing Base System! This could cause the failure of the installation! To always execute a fresh install;
不要将这个版本覆盖安装到已存在的Mac OS X上，这可能导致安装失败。
* Do Not Select more than one a drivers of the same type! For example, Do not select 2 Audio Drivers or 2 SMBIOS, this will in many cases cause the install to fail;
不要选择两个或更多相同种类的驱动，比如说，同时安装两个声卡或SMBIOS的驱动，很多情况下会导致安装失败。
* Vanilla 9.6.0 is default kernel;
默认安装9.6原版内核。
* If you have based on AMD and/or SSE2 you must select an alternative kernel, advised kernel voodoo 9.5.0;
如果你的CPU是AMD或者是较老的Intel（仅支持SSE2）那么必须选择安装另外的内核。建议使用Voodoo 9.5。
* If you use kernel Voodoo you don't select the AMD Patch ;
如果使用Voodoo内核那么不需安装AMD Patch。
* If you use Voodoo Kernel you must select "Seatbelt Fix" under fix for resolve the problem of mount of an .dmg,.iso or .cdr;
如果使用Voodoo内核那么你必须选择Fix下的"Seatbelt Fix"，否则会导致装载dmg, iso或者cdr的时候四国。
* If you select AppleBCM5784M_5787M and of the restart don't work, you could try with the package that there are in the Root of your System Partition;
如果选择安装了AppleBCM5784M_5787M(Broadcom 578x无线网卡驱动），重启后却不工作，那么可以尝试安装系统分区根目录下的安装包。
* If your system's sound does not work even after installing the proper sound drivers there may be an issue with the System Preferences. Go to System Preferences Sound > Output > and make sure that "Internal Speakers" is chosen and not Headphones or something else;
如果即使安装了正确的声卡驱动，Mac还是不能发声，那可能是系统配置的设置问题。进入系统设置-〉输出，确认选择的是“内置扬声器”而不是其他的什么。
* If you have a NVidia Video Card you don't select more than a injector. You can choice or NVinject, or NVKush, or NVdarwin;
如果使用N卡，不要选择两个或更多的Injector。一个就好。
* If you have a problem with ACPI_SMC_PlatformPlugin.kext you can select ACPI_SMC_Fix under Fix Menu;
如果ACPI_SMC_PlatformPlugin.kext导致问题，在安装时选择ACPI_SMC_Fix。
* If you have a compatible system you can select ACPI Kext 10.5.6, under Alternative Essential Patch Menu, and are original ACPI Kext from 10.5.6;
如果你有一个较接近Mac的机器，你可以尝试下10.5.6的原版ACPI Kext。
* If you have kernel panic and you don't know what caused it, boot in verbose mode ( -v boot flag at the F8 boot prompt ) for visualize the error;
如果遇见四国，启动时使用-v参数收集错误信息。
* If you don't know like resolve the error you can try install only based system with essential drivers ( Ex. Chipset Drivers ) without the "extra" drivers;
如果不知道如何解决四国，安装时仅选择基本系统和最必要的驱动（比如主板驱动），而不要安装其他的东西。
* In some situations for the first boot it could be necessary to start with the flag - f for load the kext correctly;
某些情况下，初次启动时需用-f参数保证kext正确加载。
* If you haven't select Video Drivers it could be necessary to start with flag -x;
如果安装时没有选择显卡驱动，启动时需要加上-x参数。（安全模式）
* If you are installing iDeneb on one of the Netbook in list, not to select no other drivers or patch;
如果你的上网本不是下面列表中列出的，安装时不要选择任何驱动和补丁。
* Netbook Section is in update, for problem o for add others netbook to write on the official forum in section Netbook;
支持的上网本列表仍在更新中。
Changelog v1.3 to v1.4:
升级日志：
* This version include Mac OS X 10.5.6 and latest update.
这个版本包含了10.5.6及最近的更新。
* Fix CarbonLib Error;
修正了CarbonLib的错误（10.5.5里面要打补丁才能用M$ Office，现在不用了）
* Resolve the problems of speed to the boot;
提高了启动速度。
* Added Chameleon 1.0.12 with PCEFI9;
引导程序更新为Chameleon 1.0.12+PCEFI v9。
* Added About This Mac Fix;
加入了“关于本机”补丁。。（装不装无所谓）
* Added AppleSMBIOSEFI.kext by Default for use original AppleSMBIOS.kext;
加入了AppleSMBIOSEFI.kext（可使用原版AppleSMBIOS）
* Added Disabler.kext for excute the system update by Software Update;
加入了Disabler.kext（可自动禁用有问题的kext，特别是软件更新自动下载的）
* Replaced dsmos.kext with AppleDecrypt.kext;
用AppleDecrypt.kext换掉了dsmos.kext（个人感觉更稳定）
* Update ID list of NVidia Video Card with support for 9*** Series ( for more info, visit the site );
加入了N卡9***的ID，支持最新的N卡。
* Essential System has been set up like optional
可自选系统组件。
* ACPI-Fix Integrated;
整合了ACPI补丁。
* Fix Error on "ACPI_SMC_PlatformPlugin.kext" during the dvd boot;
修正了安装盘启动时ACPI_SMC_PlatformPlugin.kext的错误。
* Added more ID Device in AppleVIAATA.kext ( for more info, visit the site );
加入了更多VIA芯片组支持。
* Removed AppleGenericPCATA from VIA/SiS/Marvell/Uli ( Old VIA-SB ) for blocked of 128 Gb in the Hardisk and Added AppleGenericPCATA.kext as Optional Driver;
删除了AppleGenericPCATA，对128G以上硬盘有问题。现在是可选安装。
* Added ATIATA for ATI Chipset;
加入了ATI芯片组支持。
提升卡
沉默卡
喧嚣卡
千斤顶
楼主 
