恭喜各位也选中了S300+这个机器,这只手机功能很多,希望各位越用越喜欢,我先把这手机的按鍵方法送给大家,
轉帖自hkppc :
善用 S300+(Trinity) 按鍵去操作PDA
其實同Hermes操作差不多。中英對照。
1. 跳出去Today畫面
當你用緊軟件或電話時，連續按兩次開始功能鍵 (Start) 就會跳出去Today畫面。
Jump to the Today screen
When in any app, you can press the start hardware button twice to take you back to the today screen. The call handup button also performs this task.
2. 尋找快速撥號打電話
使用電話功能(撥號畫面)時，操作導航鍵, 按向下或向左，會出到快速撥號畫面。
再用導航鍵或滾輪鍵去找你想打既號碼。
Speed dial shortcut
In the phone application, click down or left on the D-Pad OR scroll down with the scroll wheel. Select a call with the scroll wheel and click the wheel in to dial that number.
3. 尋找電話記錄打電話
使用電話功能(撥號畫面)時，操作導航鍵, 按向上或向右，會出到電話記錄畫面。
再用導航鍵或滾輪鍵去找你想打既號碼。
Recent phone calls list with scroll wheel
In the phone application, click up or right on the D-Pad OR scroll up with the scroll wheel. Select a call with the scroll wheel and click the wheel in to dial that number.
4. 係Today畫面單手操作
係機身左側OK鍵，按一下會出到開始功能表，再用導航鍵或滾輪鍵去選擇開啟程式或設定。
Slick One-Handed Navigation on the Today Screen
Using the OK button directly below the Scroll Wheel while on the Today Screen will open the Start Menu. This makes it extremely easy to navigate and launch applications with just your thumb -- press OK, Scroll, and Scroll-click to select!
5. 無需使用觸控筆尋找聯絡人
如你既聯絡人係用英文儲存，呢個方法係尋找英文名第一個字母。
開啟聯絡人，操作導航鍵，向下按住不放約5s，跟着會出一個細畫面並顯示英文字 “A”。 再向下按導航鍵，會一路出 B,C,D……..。尋找你想要聯絡人既英文名第一個字母。
Scrolling Contacts without Stylus
When in 'Contacts' hold down ‘down’ on the D-Pad. It'll start scrolling the list for approx 5 seconds, then a 'pop up window' appears with a large letter “A”. Use the D-Pad to select appropriate contact start letter. Make it easier to scroll through the contacts without having to get the stylus out.
6. 無需使用觸控筆尋找不同電郵户口
開啟電郵，重覆向左或右按導航鍵，你所設定既電郵户口，如Outlook Mail, Text messages, Hotmail, MMS accounts etc 會重覆出現。
Cycle through mail accounts
If you keep on pressing left/Right on the D-Pad hardware button it cycles the Outlook Mail, Text messages, Hotmail, MMS accounts. Really nice since you do not need to hit the menu button.
7. 校準LCD
同一時間按導航鍵中間個粒確定鍵，和左快速鍵或右快速鍵，跟着再按係機身右側語音命令鍵 (Button 1) ，會直接去到校準LCD畫面。同一時間，兩個OK鍵沒有了反應。校準LCD後要等一陣，兩個OK鍵才回復功能。
Screen alignment
Pressing the Left/Right soft key and the D-Pad key combo, and then press the button 1 (Voice Commander), it will go straight to screen calibration tool. At the same time the OK button at the front and left side are not response. After screen alignment, it need to wait one moment and both OK buttons will resume function.
1. 尋找快速撥號打電話
使用電話功能(撥號畫面)時，使用滾輪鍵，向下推，會出到快速撥號畫面。再用導航鍵或滾輪鍵去找你想打既號碼。
2. 尋找電話記錄打電話
使用電話功能(撥號畫面)時，使用滾輪鍵，向上推，會出到電話記錄畫面。再用導航鍵或滾輪鍵去找你想打既號碼。
楼主 
