*Non Swap / Direct Boot
无须引导支持IC
*Boots Own Region WII Backups Directly
*Boots Own Region Gamecube Backups Directly
目前尚未破解全区，只支持单区
*Boots Imports Gamecube Backups by SWAP
*D2B Drive Support and Improved Read Method
D2B芯片驱动支持
*Yes,We've AudioFix ;)
音效修正
*MultiDisc/MultiGames
支持网络游戏
*Easy Soldering & Remove / 5 Wires
*New!! 25€ Retail Price (Doesn't include taxes)
官方定价25欧罗
*Support DVD-R and DVD+R
(Burn +R on DVDROM Booktype)
支持DVD-R和DVD+R（需要修改Booktype）
*Universal EUROPE/USA/JAPAN Wii Console Supported
还是全区的问题
*Stealth Mode
*NOT Upgradeable / ON SALES NOW!!
不支持升级……
FREE: · Wiinja Deluxe豪华版
*Non Swap / Direct Boot
无须引导支持IC
*Boots Own Region WII Backups Directly
*Boots Own Region Gamecube Backups Directly
目前尚未破解全区，只支持单区
*Boots All NTSC JAP/USA on NTSC WII
日制NTSC和美制NTSC都支持
*Boots NTSC Backups/Originals on PAL WII Partially
*Boots PAL Backups/Originals on NTSC WII Partially
*Boots Directly Gamecube Original/Backups Imports Partially
*Boots All Gamecube Import Backups by SWAP
*Supports all the WII Versions/Drive currently available
*D2B Drive Support and Improved Read Method (No DRE)
D2B芯片支持，无须驱动
*Yes,We've AudioFix
音效修正
*MultiDisc/MultiGames
支持网络游戏
*Easy Soldering & Remove / 6 Wires
*New!! 35€ Retail Price (Doesn't include taxes)
官方定价35欧罗
*Support DVD-R/DVD+R & DVD+RW/DVD-RW
without Booktype
支持DVD-R和DVD+R
*Universal EUROPE/USA/JAPAN Wii Console Supported
*Hardware DISABLE Option Using Pin3+SW2
(Poweron+Reset)
IC芯片【激活/关闭】选项
*Stealth Mode
*Recovery Mode for Bad Upgrade
可修复和升级
*UPGRADEABLE by DVD/ ON SALES NOW!!
升级使用DVD
*Direct boot of NTSC Wii imports on NTSC consoles (no patch needed)
*Direct boot of PAL Wii imports on NTSC consoles (no patch needed, partial compatibility)
*Direct boot of NTSC Wii imports on PAL consoles (no patch needed, partial compatibility)
全区通杀
*Runs imported GC games (partially without swap)
NGC游戏也通杀
*Perfect compatibility (100% of games are working)
*Improved read (no more slowdowns)
*Compatible with DVD-R, DVD+R, DVD-RW and DVD+RW (no bitsetting required)
全盘通杀
*Fully upgradable via DVD
使用DVD升级
*Direct boot of Wii backups
*Direct boot of GC backups
*Direct boot of homebrew in GC mode
IC通杀
*Build-in audio fix (no patch required)
音效修正
*Compatible with Multi-Disc games
支持网络游戏
*Stealth mode
*Multi-purpose LED
*Chips supplied in professional ESD packing
*Very easy to install
*It's the real thing, the chip is already shipping!
* Direct boot of wii backups
* Direct boot of GC backups
* Direct boot of homebrew in GC mode
ICWii和NGC
* Supports all currently available console/drive versions
* Supports D2B chipsets
支持D2B芯片
* Sophisticated (true) update mechanism via DVD
(future proof, expect cool features to come)
* Direct boot of different NTSC region Wii games/
backups on US and JAP consoles
* Partial support for NTSC region Wii games/backups on PAL consoles
全区问题没解决
* Boots different region GC games/backups (partially without swapping)
* Supports multi-disc games for BOTH Wii and Gamecube
* Supports DVD-R / true DVD+R and +RW support (no bitsetting required!)
* Improved readsettings for recordable media
* Built-in audio fix
* Supports fullsize 4GB discs for gamecube homebrew
* Stealth mode
* 512 byte EEPROM to store configuration
* Quicksolder interface - no wires required
* Unique disc backup application via sdcard
* Compact design, best quality components, rock solid high speed controller
* Professional ESD packing
* Recovery mode - Can recover from a bad flash
I made this tutorial to hopefully prevent Less damaged Wiikeys and
Theres a few reasons to use my shortwire method:
1. It is the cleanest looking method
2. The wires are short for a good connection
3. It holds the wiikey inplace while you solder
4. Since theres no wires to route,less chance of a short.
5. Because I said so!...lol
OK now lets start off with the tools needed:
1. 15 watt soldering iron w/grounded tip
2. .015 dia. Silver bearing solder
3. 30 awg Kynar wire
4. Exacto knife
5. Mini wire cutter (optional but recommended)
6. Flux paste
The rest of the tools in the pic are for taking taking the wii apart..ect..ect
Ok now lets start with cutting six 1 ｽ inch strips of kynar
The easiest way to strip kynar is to hold one end of the wire on a table and press an exacto knife down while spinning it with your fingers.
Ok now we need to add flux to the wii is solder points/pads
Use the tooth pick to dab a tiny amount of flux on to each pad
Some people have asked if it is nessary to add solder to the pads(tinning) the answer is no,theres more then enough solder on the wii is pads already, and we are gonna tin the wires instead.
To tin the wires we are gonna put a tiny bead of solder onto the soldering iron and touch the wire to it.
But before we do that we need to tin the tip of the iron to insure a nice bead will form onto the tip.
The way we do this is using a wet sponge or paper towel, we put alittle solder onto the tip and then wipe it off with the wet sponge or paper towel.
Now lets put a bead on it.
Now to transfer that bead onto the wire.
Now lets place it onto one of the wii is pads and since the flux is some what sticky it should help prevent it from sliding off the pad as you hold it in place.
Dont forget to clean the irons tip with the wet sponge/paper towel.
Now while holding the wire onto the pad, quickly touch it with the tip of the iron.
Now clean the irons tip and and tin the next wire.
Keep repeating the process until all six wires are soldered.
Ok now all wires are soldered.
Now using and angled pick, mini screwdriver, safety pin, or any small pointy object ,gently lift all wires so there standing straight up.
With the wires standing up, gently lower the chip,feeding the two top wires through the holes on the wiikey chip, and placing it down onto the wii is pad area.
Now that the wiikey is in place use your mini wire cutter to cut off the excess wire.
Now using your pick, mini screwedriver,needle..ect..ect gently fold the protruding wire over the pad,pressing down so it hugs to the wiikey pad, and apply a dab of flux.
Now clean your tip and apply a small bead of solder, and quickly touch the iron to the wiikeys pad.</div>
Now that its soldered let move onto the next pad.
Cut ,fold ,flux, and solder the next pad.
Now that we have a few soldered we can cut,fold,flux the rest.
Now lets solder the rest of the pads.
Ok were done!
Now its time to put everything back together ,burn wiikeys setup disc
Access control LEDs
LED 1: disc access indicator.
LED 2: data patching indicator:
Flashes smoothly during disc insertion and detection
Lit when backup is detected (after disclogin)
Off when original is detected
读取控制LED(发光二极体，功能是发光)
LED1:光碟读取指示器
LED2:资料修补指示器
．当放入光碟时平稳地闪烁
．当侦测到备份片时发光
．当侦测到原版片时关闭
DVD media compability
DVD+-R
DVD+-RW
Dual-layer DVD (movies and GCOS)
DVD光碟相容性
．DVD+-R
．DVD+-RW
．双层DVD(影电和GCOS)
Game disc support:
Direct boot of Wii original and backup games from the same region
Direct boot of Gamecube original and backup games from the same region
Direct boot of different NTSC region Wii and GC games on USA and JAP consoles
Partial region free support on Wii and GC original and backup games with different videomode
Improved readsettings for recordable media
Supports running GC games at Wii diskspeed
GC Audiostreaming Fix
Supports full-size DVD and DVD9 discs for GC homebrew
Supports GC multigame discs
Supports Wii and GC multidisc games
游戏光碟支援：
．直读同区Wii的原版片与备份片
．直读同区GC的原版片与备份片
．美、日机直读不同NTSC区Wii和GC的游戏
．不同影像模式(PAL <->美，日)部分支援直读Wii与GC备份片
．改善烧录片读取设定
．支援用Wii的光碟读取速度来跑GC游戏
．GC声音流修正
．GC自制程式支援使用DVD-5和DVD-9光碟 ?
．支援多光碟片的GC游戏
．支援多光碟片的Wii和GC游戏 9)
True stealth mode
Does not modify RAM, making it virtually undetectable for the Wii
Full command set emulation
隐藏模式
．不修改RAM让晶片不会被Wii侦测到
．(Wii光碟机系统的)所有命令集模拟
更详细的特性说明
Quote:
It Just Work
可用
Direct boot of Wii and Gamecube games, on-the-fly region patching, audiostreaming fix and
more.
直读Wii和GC游戏，直接区码修正，(GC)声音流修正和更多。
D2CKey has been designed with user simplicity in mind. After installation (which, in all fairness,
should be left to a professional!), it just works. There is no need to set up, reflash, upgrade, or fiddle
around. D2Ckey automatically detects what kind of disc is inserted, and configures the drive
accordingly. Original and backup original Wii and Gamecube games from different regions with the
same video system boots directly, and even a lot of games from regions with different video system
can be booted directly. Gamecube audiostreaming fix is built-in from the start.
D2CKey在安装后(安装留给专业人士)是简单易用的设计，不需要设定、更新、升
级就可以
用。D2Ckey可自动侦测放入的光碟，然后根据放入的光碟来设定光碟机。(不同区但相同影
像系统)日版与美版的Wii和GC游戏可以在日、美机直读，即使是不同影像系统(指欧的PAL
和美日的NTSC不同)的很多游戏也可以直读。内建GC声音流修正。
Quote:
Use with all kinds of media
支援所有的光碟
Compatible with most DVD+/-R and RW media (no bitsetting required) and multigame discs.
支援大部分DVD+/-R和RW光碟(不需要bitsetting)和多光碟游戏
MUH
DVD-R, DVD+R, DVD-RW, Dual Layer DVD, bitsetting... finding the right recordable media and the
right burner isnt always that easy. Some kinds and brands of media and recorders might work better
with the Wii drive than others. D2Ckey offers support for most of them from the start, making it
simpler for you. While a certain media, burner, or combination might not work properly with a
certain drive, it will be easier to find a working combination knowing that d2ckey supports most of
the common recordable media types.
350MHz Performance with advanced AES128 bit encryption, yet runs on an ultra-low-power core.
AES128bit进阶加密的350MHz执行效能，可以在超低电压下使用的核心。
The overall system performance of D2Ckey is 350Mhz, compared to around 8MHz for serial-port
based modchips.D2Ckey uses the latest flash-based FPGA technology from Actel, which has many
powerful features. It has a super-fast, ultra-low-power 1.5V core that will literally remain cool all the
time. This means no strain on your Wii (and there is no need recalculate your carbon
footprint).Another powerful feature is that the programming is protected by powerful AES128
encryption, making reverse engineering attempts infeasible. Therefore it will be very difficult to find
a way to detect or block the chip in any way in the future. In the past modchips and smartcards using
less secure devices have eventually been hacked, making it possible to detect them and lock out
modified systems. An example of this are self-updating d2mac and Conax satellite tv pirate cards,
whose MK's have been revoked, rendering the card inoperable.
Integrates a next-generation ICMS to ensure stability during loading and gameplay.
整合次世代的ICMS保证游戏稳定度。
The first generations of Wii drive controllers - known as DMS, identical to D2A, and D2B all had a
serial port interface that could be used to inject code, making it possible for backup discs to load
enable other funky stuff as well).Albeit easy to install, modchips that uses the serial port have some
disadvantages. Due to the way they interact with the drive controller it is possible for the Wii
hardware to detect them (they modify RAM, for eample).This way of modifying the Wii does not
work with the D2C controller, because the serial port can no longer be used to inject or modify .
code.D2Ckey uses a new approach we call the Intelligent Code Modifying System (ICMS). Instead of
just uploading some code and then doze off, ICMS constantly monitors data on address and data
buses, patching it if necessary. This has several advantages:
1.is virtually undetectable by the Wii hardware
2.Improved reading of recordable recordable media
3.Backup disc loading will emulate original game disc loading closer
By interfacing more of the circuitry of the drive controller D2Ckey has a better understanding of what
is going on inside. Stability and compability have been the main design objectives.A good example
of the dangers with oversimplified chips are the 4-wire PIC12C508-based PS1 modchips that where
very popular around 1997. First, Microchip, the manufacturer of PIC chips, made some changes in
the manufacturing process, affecting the in-system clock. This was technically not a manufacturing
flaw, as the fault was still within the tolerance specified in the datasheet, but the chips stopped
working. If the 5th wire, a clock signal from PS1, had not been stripped (the 5-wire modchips still
using the PS1 clock did not have any problems) then there would not have been any problems.
Shortly after games appeared that detected active modchips - once again, a few extra wires would
第一代的Wii光碟机控制系统(DMS/D2A/D2B)有serial port (序列埠)介面可以用来写
入指令码让
备份片可以直读(和其他有趣的用途)虽然安装简单但是serial port (序列埠)晶片有一些缺点，
由于和光碟机系统的互相影响让Wii主机可以侦测到，因为他们修改RAM。这个修改Wii的方
法在D2C系统上不适用，因为iserial port (序列埠)不能用来写入指令码了。
D2Ckey使用我们叫智慧码修正系统(ICMS)的新方法，以前的方法是载入一些修正码然后就
提升卡
沉默卡
喧嚣卡
千斤顶
楼主 
